**CUAL UPDATES**

Fixed an issue in PDF Export settings so that when Show Header or Footer on all pages was unset that it would still be displayed on the first page. Renamed “Include Sample Results” to “Include Sample Data”

MV-RPRT | Updates to MV PDF Report Settings and PDF Page Layout for All Test Types

CMV-690

Updated error message logic in the Test Definition Interference section to reduce uneccessary error notifications.

MV-EXPInter TSTS BG QNT | Interference Error Message Logic

CMV-746

Ensure error messages on the Interference section are only displayed when both relevant fields have been interacted with, preventing premature visual noise. Currently, the error message "An Interference must have an Interfering Substance and Allowable Error %" appears prematurely when a new interference row is added. The error message should only be triggered whenboth fields have been interacted with (touched) but left blank. Leaving the "Interfering Substance" field blank should not trigger an error. h2. *Implementation Details:* # Update the validation logic for the Interference section: #* The error message is only triggered when both fields are touched and left blank. # Ensure the form validates correctly on save, ensuring that: #* An error message appears if any of the 2 fields are left empty, regardless of either field's state. h2. *User Flow:* # The user adds a new interference row. # No error message is displayed initially, even if both fields are empty. # The error message only appears when either field is touched but left blank.

Fixed validation error in Test Definitions preventing test saving when Range Low was less than Range High.

MV-EXP TSTS QNT | Range Low and Range High Errors During Test Editing

CMV-790

The application displays a validation error message, *“Range low must be less than range high”*, and prevents saving a test, even when the entered values satisfy the condition (i.e., _Range Low_ is indeed less than _Range High_). !2025-01-21_173047_Microsoft_Edge.png|thumbnail! h4. *Steps to Reproduce* # Open the test setup or experiment configuration page. # Enter a valid *Range Low* and *Range High* value where _Range Low_ is less than _Range High_ (e.g., Range Low = 2.4, Range High = 186.2). # Attempt to save the test.

Fixed an issue where leftside menu tooltips were sometimes being cut off.

ORGS BG | If the window is resized and upon hover, the menu tooltip should be on the tap of the page content

CMV-673

Steps to replicate: # Resize the window # Hover on the menu Result: Menu label is not visible *Second scenario:* The tooltip is cropped !image-20241114-004522.png|width=1254,height=906,alt="image-20241114-004522.png"! !image-20241106-034445.png|width=1513,height=982,alt="image-20241106-034445.png"!

Fixed an issue where the select experiment header in MVs would show up twice.

MV-EXP BG | Test and Experiment value should not be displayed if the Select Test and Select Experiment section is already displayed

CMV-675

(This is quite hard to replicate) Ref: [https://discord.com/channels/965551040890028062/1219085471557353652/1303573129146138717|https://discord.com/channels/965551040890028062/1219085471557353652/1303573129146138717|smart-link] !image-20241106-055428.png|width=1174,height=1102,alt="image-20241106-055428.png"!

Fixed and issue where analyte options would display even when there was already one selected.

ANZ BG | In analyzers, when adding a Analyte in Add Quantitative Test modal, If I entered the Analyte and I clicked the Add button, the dropdown options should not be displayed.

CMV-676

Test Condition: User is in [https://app.cualia.io/org/gnxnzhnh57j/analyzer/g19zft1ylf/tests/qual|https://app.cualia.io/org/gnxnzhnh57j/analyzer/g19zft1ylf/tests/qual] User is QA Owner Steps to replicate: # In Tests Quant, click Add a Test button # Input a unique or new Analyte Name e.g. TAN000000 # Click Add: [Name of Analyte] Result: Dropdown options were displayed Screen recording: [https://jam.dev/c/3b1a2cd5-8f25-4990-86a2-dfbc35f3d928|https://jam.dev/c/3b1a2cd5-8f25-4990-86a2-dfbc35f3d928|smart-link] Note: This is also applicable to QL

Fixed up some of the equations in Carryover to display the equation on the tooltips. The documentation at https://docs.cualia.io has been updated to reflect these as well. Before the Carryover would use the means of the high and low concentration values. It now only uses the first and last to calculate carryover.

MV-EXPCarry ADT | Update Label in MV Carryover SD Mode Experiment Results

CMV-678

The current display of results in the MV Carryover (SD Mode) Experiment section shows "Result" as the label for the bottom results. To better align with the terminology used in this experiment, this label should be changed to "Carryover SD." !Screenshot 2024-11-07 at 10.19.58 AM.png|width=1123,height=87,alt="Screenshot 2024-11-07 at 10.19.58 AM.png"! h2. User Flow: # The user navigates to the MV Carryover Experiment. # The user changes the experiment mode to Standard Deviation (SD). # They observe the updated label "Carryover SD" where "Result" previously displayed.

Fixed the icon positioning issue after clicking the redo button. Fixed inconsistent undo/redo functionality when using Force Pass in Method Comparison experiments.

MV-EXP MV-EXPMC SMQ BG | The undo, redo and reset icons should not move upon clicking redo button

CMV-722

Environment: Staging Test condition: User is in [https://staging.cualia.io/org/Tl2p0u9W/mv/f1n5k0426x/tests/hh6uy6xr8xk/semiQuant/methodComparison|https://staging.cualia.io/org/Tl2p0u9W/mv/f1n5k0426x/tests/hh6uy6xr8xk/semiQuant/methodComparison] Steps to replicate: # Update the source of Label one, label two and label three # Click undo button # Click Redo button Result: Undo, redo and reset icons moved on the left side upon clicking Redo button

Fixed missing yellow check icon for incorrect daily run results in SMQ and Qualitative modes.

MV-EXPPrec BG QL SMQ | Yellow Check Icon Missing for Incorrect Daily Run Results in SMQ & Qualitative Modes

CMV-767

Ensure that the yellow check icon appears correctly when all run results in a day are incorrect for SMQ and Qualitative modes in the Precision Experiment. The Precision Experiment UI currently has a bug where the yellow check icon does not display when all run results in a day are incorrect in SMQ and Qualitative modes. Instead, the field remains blank. This behavior is inconsistent with Quantitative mode, where the icon functions correctly. !yellow check.png|width=745,height=580,alt="yellow check.png"! h2. Steps to Reproduce: # Open the Precision Experiment for SMQ or Qualitative mode. # Input incorrect run results for all runs in a single day. # Observe that the yellow check icon does not appear in the daily summary column.

Fixed the progress indicator for SMQ tests to display accurate completion percentages.

MV-EXP BG SMQ | Progress Indicator Always Shows 0% for SMQ Tests

CMV-768

Fix the progress indicator for SMQ tests to accurately reflect the percentage of test completion. The progress indicator for SMQ tests always displays "0% complete," even when there is measurable progress on the test. This issue creates confusion for users tracking the status of their tests. !zero.png|width=583,height=395,alt="zero.png"! h2. Steps to Reproduce: # Open an SMQ test in the MV module. # Perform some test steps to make progress. # Observe that the progress indicator remains at "0% complete."

Fixed an issue when copy pasting in reports that some HTML symbols would occur

Fixed a bug in Verifications list where the last modified cell would sometimes be empty

Experiment table checkboxes are now easier to click. Before it would sometimes require a double click to select the cell. Now we made it easier by expanding the area that would register a selection.

Regression values were sometimes labeled as “R” instead of “r.” This was fixed in the new release to decrease confusion.

Fixed an issue where the MV Evaluator (person performing the MV Evaluation) was difficult to select.

Fixed an issue where sometimes in the Verifications list that the last modified field would sometimes be empty.

Experiment table checkboxes were sometimes difficult to click, requiring precise positions or double clicking. We’ve made it more intuitive.

For consistency, all regression values displayed with capital R have been changed to r.

There was a bug in MV’s when selecting the evaluator personnel that it would disappear. This has been resolved.

In the tests sections of MV Reports you can generate a table for each test each experiment status.

MV-RPRT | Updates to MV PDF Report Settings and PDF Page Layout for All Test Types

CMV-690

In Quantitative MV Trueness Experiments you can now select a Range Mode to match your EQA testing ranges.

Bias and Bias % charts were added to Linearity and Method Comparison tests. This allows for better insight into how the performance of the evaluation proceeded highlighting any systemic errors and shifts.

In MV Experiments and PDF exports, links to documentation have been added to help find information on how to run the evaluations and reference the equations used in Cualia calculations.

In Quantitative Method Comparison and Linearity experiments the type of regression may be selected with specific cutoffs for more advanced analysis. Additional to this, each regression is displayed with any results available as part of the analysis.

We added a feature in MVs to export all of one specific experiment type. For example you can export all the Linearity Experiments within an MV. This can be useful if you have an auditor who prefers viewing MVs by experiment-type instead of by test.

This is an experimental feature. Currently smart content is a very powerful tool with a lot of complexity. We have started early implementations to make it possible to copy paste sections and tables with smart content to other summaries to function more like normal word processing.

Removed "References" from the default Conclusions section in reports for clarity. You may still add a reference section, but it is no longer a default Report section.

MV-RPRT ADT | Remove "References" from the Default Section of Conclusions in Reports

CMV-721

Streamline the default structure of the "Conclusions and Final Remarks" section in reports by removing the "References" fields. !Screenshot 2024-12-05 at 1.30.02 PM.png|width=1660,height=880,alt="Screenshot 2024-12-05 at 1.30.02 PM.png"!

Tooltips for equations were added to the Quantitative and Qualitative MV Experiments. This was a heavily requested feature to give more clarity to our users for what was on the page without making the UI overwhelming.

Bias Column was added to Quantitative Linearity tests. This gives a sense of where the mean replicate measurements were compared to the reference value.

There has been a lot of confusion about which is the result of your instrument and which is the reference. X and Y, actual expected, actual and reference. In the future we will switch to “Measurement” and “Reference.” The Bias Calculation has now been flipped to be Actual - Reference to show correct positive and negative bias. The charts will reflect this change as well.

The MV Reports Button will default to keeping you within the window you’re using. An open in new window icon is on the left if you wish to continue checking your reports in a separate window.

The experiment summary text area will now allow up to 1500 characters. However due to spacing requirements, summaries will appear on its own page of PDF exports.

MV Experiments now have a link to relevant documentation on web and PDF exports. This allows a quick reference for how to perform the evaluation in Cualia, set Acceptance Criteria, see all the definitions and equations used in the calculations.

Size of the dots in our charts were reduced by 30%. This makes the specific areas of the graph more readable when there are more data points.

MV Default values were added if they were not pre-set Quantitative Precision (CV Mode): CV %: 2.5 Quantitative Accuracy (TEa Mode): Reference Value: 2.5 Quantitative Linearity (Reference Values): Reference Values: Rounded to 2 decimals. Quantitative Carryover (Percent Mode): Allowable Percent: 10% Quantitative Carryover (Standard Deviation Mode): Allowable Standard Deviation: 1 Quantitative Limit of Blank (LoB): LoB Reference Value: 0.05 Quantitative Limit of Quantitation (LoQ): LoQ Reference Value: 0.1 Qualitative Limit of Detection (LoD): Minimum Detectable Concentration: 1